flange-to-flange-reaction-torque-sensor

Flange to Flange Reaction Torque Sensor

Because non-accelerating systems must have equal reactions to actions produced, it is often possible to measure output torque by measuring reaction forces acting on the device’s housing.  This sensor is ideal for measuring reaction or restraining torque in motor, pump, and fixture mounts. These hollow sensors are well suited for limited rotation applications.

Model number: 01165, 01166, 01167, 01168, 01169, 01170, 01171

For more information or to request additional specification, please contact us.

    Specifications
    Capacity 50 to 200,000 in.lb. (See chart)  
    Overload capacity 150% of F.S.  
    Output at F.S. 2.0 mV/V nominal  
    Non-linearity 0.10% of F.S.  
    Hysteresis 0.10% of F.S.  
    Zero balance 1.00% of F.S.  
    Compensated temperature 70 to 170°F  
    Useable temperature -65 to +250°F  
    Temperature effect on zero 0.002% of F.S./°F  
    Temperature effect on span 0.002% of Rdg./°F  
    Bridge resistance 700/350 Ohms  
    Excitation voltage, maximum 20 Vdc